Bluetooth® and/or WirelessHART adapter WirelessHART Adapter SWA50

Brand: Endress+Hauser
SWA50
Images are representations only.

Bluetooth® and/or WirelessHART adapter WirelessHART Adapter SWA50

Brand: Endress+Hauser

Vector, Endress+Hauser's exclusive USA representative in:
● Northwest AR ● South IL ● KS ● MO ● East NM ● OK ● TX

Fundamental Fundamental

Specs at a Glance

Output:
WirelessHART and/or Bluetooth® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication - up to 200 m (656 ft),
Bluetooth communication - up to 40 m (131 ft)

Field of application

The FieldPort SWA50 converts the HART signal of the connected HART field device to a reliable and encrypted Bluetooth® or WirelessHART signal. The FieldPort SWA50 can be retrofitted to all 2-wire and 4-wire HART field devices in both hazardous and non-hazardous areas. The robust stainless steel housing allows the FieldPort SWA50 to be installed even in harsh industrial environments

Key Benefits

  • Reliable transmission of the measured process values through the connected FieldPort SWA50 via encrypted Bluetooth® or WirelessHART communication
  • Easy to retrofit all 2-wire or 4-wire HART field devices

Specifications

Brand

Industry

  • Chemical
  • Water, Wastewater & Waste
  • Food & Beverage
  • Mining, Minerals & Metals
  • Oil & Gas
  • Life Science

Product Family

  • FieldPort

Wireless components

Function

  • Intelligent WirelessHART and/or Bluetooth® interface module for easy and fast connection to HART devices

Certification

  • Non-hazardous area, ATEX, IEC Ex

Input

  • One point-to-point with HART device

Output

  • WirelessHART and/or Bluetooth® communication interface,
  • Operating frequency: 2.4 GHz (ISM band),
  • Transmission range under reference conditions:
  • WirelessHART communication - up to 200 m (656 ft),
  • Bluetooth communication - up to 40 m (131 ft)

Auxiliary power supply / Loop power supply

  • Loop-powered 4 to 20 mA

Dimensions (wxhxd)

  • W x H x D: 146 mm x 42 mm x 42 mm
  • (dimensions in mm 25.4 = 1 inch)

Software

  • Internal software for reading data from HART field devices and communicating over WirelessHART and/or Bluetooth®

Operation

  • Integral via DIP-switches,
  • Cell Phone configuration via SmartBlue App and Bluetooth®,
  • Field Xpert configuration via Bluetooth® or HART-modem,
  • PC configuration via FieldCare and HART-modem,
  • PC configuration via FieldCare and WirelessHART Gateway

Operating Voltage

  • 24 V DC (min. 4 V DC, max. 30 V DC): min. 3.6 mA loop current required for start-up
  • Voltage drop if internal HART communication resistor is deactivated:
  • 3.2 V in operation, < 3.8 V at start-up
  • Voltage drop if internal HART communication resistor is activated (270 Ohm):
  • < 4.2 V at 3.6 mA loop current, < 9.3 V at 22.5 mA loop current
show more